Search:
  • Hot:
None
Product
Where:HOME > Aerial Work Platform > Articulating Boom > Aerial Work Platform
Description Specification After-sale service

1.It adapts to shipyards and other specific operating environment and can work in damp, strong corrosive, dusty, high-temperature, low-temperature environment.

2.The operation platform can be safe to walk, no matter  the arm frame is in which position.

3.Platform is equipped with foot switch.Only when the foot switch is stepped down,the operator can operate.

4.Working blunket has a function of weighing.It can idetect the load of the platform accurately.And it has nothing to do with the location of the load on the platform.

5.Working blunket has a function of weighing.It can idetect the load of the platform accurately.And it has nothing to do with the  the location of the load on the platform.When the load on the platform is over its rated load,it can display,alarm and limit the movement of platform at the same time.

6.It has the function of programmed action.Only when the angle of the tower arm transforms to the largest,the tower telescopic arm can stretch out.And only when the tower telescopic arm retracts  absolutely,the tower arm can transform downward.To prevent tilting forward or tilting backkward and ensure the stability of the vehicle.

7.Control System
PLC and CAN bus control mode.Use a metal anti-aircraft plug.And the level of protection reaches IP65.
Be equipped with upper and under platform console(ground console and platform console).And use the reversing switch to transform.
The under console indicates oil temperature, oil pressure ,water temperature and many other things of the diesel engine.
Ground console and platform consoleare are equipped with emergency stop button.When something unexpected happens, the operator can quickly cut off power supply to avoid the platform continue to move. 

8.Security Protection
Working bucket with automatic leveling function.Angle of working bucket relative to the horizontal plane Angle cannot be greater than 1.5 °.
Be equipped with 24 v auxiliary power unit.So when the engine and the main oil pump  break down,it can make the working bucket fall to the ground safely.
Safety valve is installed in hydraulic circuit to prevent pressure rasing abnormally in hydraulic components.
When the machine is parked on the ground whose unlevelness is over 3 °, the action of the arm frame will be limited.
Upper  and under console have a shield to protect.  
The head of the arm frame and  cylinder piston rod and other places all have dust-sand prevention devices.  
There is  position in the underframe and turntable to install rings for lifting  easily.
The identification is clear and unambiguous.

      Product code

Unit

DN01020

DN01021

Max. Working   Height

m

20m

22m 

Max. Platform   Height

m

18m

20m 

Max. Height of the fold

m

2.48m

2.48m

Max.   Horizontal Extension

m

10.8m

12.7m 

Width

m

2.38m

2.38m

Length of  the fold

m

8.25m

9.23m 

Carrying Capacity

kg

230kg

230kg

Wheelbase

m

2.6m

2.6m 

Turning Radius of the inner wheel

m

3.0m

3.0m

Turning Radius of the outer wheel

m

5.2m

5.2m

Rotation Angle of Turntable

360° continuously

360° continuously

 Swing Speed of Turntable

rpm

0~0.8rpm

0~0.8rpm

Platform size
   (length x width x height)

m

1.83m×0.76×1.13m

2.44m×0.91×1.13m

platform level

/

Automatic leveling

Automatic leveling

Rotation   Angle of Platform

±80°

±80°

Principal Arm

/

2

2

Principal Arm

-15°~+75°

-15°~+75°

Sections of tower arm


Two Sections

Two Sections

Transformative Angle of tower arm

0°~+60°

0°~+60°

Full Hydraulic Pressure

Mpa

21MPa

21MPa

System Voltage

V

12V

12V

Specification of the tire

/

33×12-20Solid Tire

33×12-20Solid Tire

Ground   Clearance

mm

430mm

430mm

Fuel Capacity

L

100 L

100 L

Total Weight

kg

7750kg 

8617kg

Travel
  speed

Folded state

km/h

6.3km/h

6.3km/h

Raised or   extended state

km/h

1.1km/h

1.1km/h

Max. pressure
  of the driving system

Mpa

25MPa

25MPa

 Max. Gradeability

16.3°(30%)

16.3°(30%)

Steering Type of the Driver

/

4×2×2(4×4×2)

4×2×2(4×4×2)

Engine

/

DEUTZ

DEUTZ

Rated Power of Engine

kw/rpm

36.3kw/2800rpm

36.3kw/2800rpm

 


Within a year of spare parts to old change new, if you need on-site repair, please contact with our servicer, we will arrange remote service and technical support or seek local partner door-to-door service.

Free Hotline: 400-8650-218



TAGS: